PA 5000 Chastitycage Small

The PA 5000 which requires a Prince Albert-piercing is the new fabulous design of AL Enterprises, the manufacturer of the ORIGINAL male CB-chasticages.

It's a black polycarbonate penisshaft which is locked in place by a hook through your Prince Albert-piercing. The light and very durable polycarbonate shaft will ensure you cannot wank comfortably while wearing the PA 5000. For how long? The Keyholder ultimately decides!

You can purchase the PA 5000 in three different inside diameters of the shaft: Small 1” (25 mm), Medium 1 1/8” (29 mm) and Large 1 1/4” (32 mm). Each PA 5000 package has three different sized hooks to lock through the Prince Albert-piering, 5 gauge each (4.6 mm).

Also included is an extension piece that can be glued to the cage making it slightly longer. Make sure to try it before glueing it to the cage. A drop of superglue on each side of the extension will hold it into place to the cage. Note the recessed area for glueing.

A small leather string in the package can be used to pull the penis forward through the shaft before locking it with the PA.

Installation Instructions:

How to measure for size?
While in a relaxed state, hold the penis as far away from the body as possible. Measure the diameter of the shaft. Example: If the shaft measures 1” in diameter, order a 1 1/8” PA-5000. You should allow 1/8” clearance for hygiene purposes.

Assembly:
Attach the leather strip through your existing PA ring. Drop it through the cage portion and guide the penis through while holding onto the cage. Make sure the head of the penis clears the end of the cage. Smooth any loose skin at the bottom of the penis back towards the body. Remove your PA ring and replace it with one of the three hooks provided with the order. Line up the hook with the locking slot in the cage. Turn the cam lock to lock in place. An additional ring is enclosed for extending the length of the cage. It is recommended that you use 2 pieces of 1/2” long waterproof tape on each side to hold the extender in place and wear it for @ one week. If you want to permanently use the extender, put a drop of superglue on each side and allow it to completely dry prior to wearing.